Triple Wheelie Bin Stores

Triple Wheelie Bin Storage. Suitable for 3 Wheelie Bins up to 240 litres. Smarten up your outdoor areas with our wooden Bin Stores. Made in Dorset by Flyte so Fancy.

A set of 3 Bin Stores, side by side (open sides between each one internally). Perfect to hide away those unsightly plastic wheelie bins and recycling boxes.

The Triple Store's external dimensions overall: 86cm front to back; 122cm high; 230cm wide. Internal dimensions of each store: 75cm front to back; 108cm high; 69cm wide.

Please check your bin dimensions. As a guide, a standard 240 litre Plastic Wheelie Bin measures 73cm front to back x 105cm high x 58cm wide (if your bin is slightly taller just let us know so we can provide a Lift-kit to raise the unit).

Each store section has a roof which you raise to access the plastic bin. The lid of the bin can be attached to a lifting cord fixed inside the roof so that only one-handed action is needed to raise both the store roof and the bin lid at the same time.

The side panels and back panels have a 2cm gap between the timber to keep the unit well-ventilated but still secure. Each roof and door has a heavy-duty, solid galvanised D-handle and the doors have heavy-duty galvanised hinges and pad-lockable Brenton Bolts.

The stores have a metal bottom brace across the front so the bins can easily be wheeled in and out (i.e. no floor) and the bin stores are one unit screwed together through an open dividing frame.

The Wheelie Bins Stores are very well made from thick pressure-treated timbers using plated decking screws. They are robust enough for a tough outdoor life and will last for many years without any preservative treatment required. We do advise applying a timber protector like Protek Eco-Shield annually to keep them weather-resistant.

Dimensions

• External overall: 86cm front to back; 230cm wide; 122cm high.
• Internal, of each store: 75cm front to back; 69cm wide; 108cm high.

Please check your bin dimensions. As a guide, a standard 240 litre Plastic Wheelie Bin measures 72cm front to back x 105cm high x 58cm wide (if your bin is slightly taller just let us know so we can provide a Lift-kit to raise the unit).

Construction

• All timber is sustainably resourced and FSC Certified, Pressure Treated Scandinavian Redwood
• Sides & Back: 21mm thick boards
• Roofs: 16mm thick Tongue & Groove
• Frame: 38mm x 38mm Pressure Treated Framing
• Fixtures: Plated & Painted Decking Screws; Stainless Steel Nails
• Fittings: Heavy Duty Solid Galvanised
• Timber Warranty: 15 years against rot & fungal attack (see Warranty conditions)

For more details about the timber we use, how to keep it waterproof and take care of it over the years please visit the About our Storage units page.

Note: Our Timber is pressure treated and warrantied against rot, fungal or insect attack for 15 years. This does NOT mean pressure treated timber is 'waterproof' nor will it prevent the natural swelling and shrinkage throughout the seasons but, it is suitable for life outdoors in all weathers. Swelling and shrinkage are perfectly natural with all timber.

Although we build in some tolerance to take account of this, you may have to slightly adjust the doors over time e.g. if the timber swells preventing the doors from closing properly. This is easily done by adjusting the hinges slightly to move the door position. Install on a level surface - concrete base or timber plinth - otherwise, the doors will need adjusting to make them level.

We advise that maintenance is required for any timber products over the years and the application of a wood protector (not varnish) annually will keep it in good condition to help the timber last 15+ years.

Current delivery approx. 1 - 2 weeks. For pallet delivery details please see our Delivery Information page.

Delivery is made on a wooden pallet via Pallet Transport lorry. You can select above if you would like the stores to arrive flat-packed in panels (a good idea when access may be an issue) or delivered partly assembled. Please consider how you will unpack assembled units from the pallet and put them in place (the lorry driver will not unpack the pallet for you).

Partly assembled means we build the double section to place it on the pallet, with the 3rd unit assembled and packed on top. When it arrives and is unpacked, you would only need to attach the 3rd store to the double, add the roofs and make any adjustments to the door levels - best done once in situ so that the bolt meets the bolt capture. Note: the stores should be completely level, on a timber or concrete plinth, to ensure bolts meet captures.

If Flat-packed then it arrives as several complete panels with full instructions and all screws needed for self-assembly - only a cordless screwdriver required (watch our video above).