Menu
FAST DELIVERY
Please see Delivery page
HAND CRAFTED IN THE UK
In the heart of Dorset
FREE ADVICE LINE
We are here to help
99% POSITIVE FEEDBACK
On our excellent service
Ref: WHB-3-3W |

Triple Wheelie Bin Stores

Share
£569.00

Triple Wheelie Bin Storage. Suitable for 3 large plastic Wheelie Bins up to 240 Litre.

Smarten up your outdoor areas with our wooden Bin Stores.

The Triple Store's external dimensions overall: 86cm front to back; 122cm high; 230cm wide. Internal dimensions of each store: 75cm front to back; 108cm high; 69cm wide.

READ MORE

DESCRIPTION

A set of three Wheelie Bin Stores, side by side (open sides between each one internally). Perfect to hide away those unsightly plastic wheelie bins and recycling boxes. British made and built to last.

Please check your bin dimensions. As a guide, a standard 240 litre Plastic Wheelie Bin measures 73cm front to back x 105cm high x 58cm wide (if your bin is slightly taller just let us know so we can provide a Lift-kit to raise the unit).

Each store section has its own roof which you raise to access the plastic bin. The lid of the bin can be attached to a lifting cord fixed inside the roof so that only one-handed action is needed to raise both the store roof and the bin lid at the same time. You can also prop the roof open with the folding wooden arm housed just inside the roof.

The side panels and back panels have a 1cm gap between the timber to keep the unit well ventilated but still secure. Each roof and door has a steel D-handle and the doors have heavy-duty galvanised hinges and pad-lockable Brenton Bolts. Note: the style and colour of the D-handles may vary (galvanised/painted/black) due to the current worldwide shortage of hardware. 

The stores have a simple flat metal bottom brace across the front so the bins can easily be wheeled in and out (i.e. no floor) and the bin stores are one unit screwed together through an open dividing frame.

The Wheelie Bins Stores, made here in our own workshop in Dorset, are very well made from thick pressure treated timbers using plated decking screws. They are robust enough for a tough outdoor life and will last for many years without any preservative treatment required. We do advise applying a timber protector like Protek Eco-Shield annually to keep them weather resistant.

  • Construction: base (where applicable), sides and back: 21mm planed Pressure Treated FSC Redwood boards
  • Frame: 38mm x 38mm pressure treated FSC framing
  • Fixtures: Plated & Painted Decking Screws used throughout; Stainless Steel Nails
  • Warranty: 15 years against rot & fungal attack
  • Made in England 

Note: Our Timber is pressure treated and warrantied against rot, fungal or insect attack for 15 years. This does NOT mean pressure treated timber is 'waterproof' nor will it prevent the natural swelling and shrinkage throughout the seasons but, it is suitable for life outdoors in all weathers. Swelling and shrinkage are perfectly natural with all timber.

Although we build in some tolerance to take account of this, you may have to slightly adjust the doors over time e.g. if the timber swells preventing the doors from closing properly. This is easily done by adjusting the hinges slightly to move the door position. Install on a level surface - concrete base or timber plinth - otherwise, the doors will need adjusting to make them level.

We advise that maintenance is required for any timber products over the years and the application of a wood protector or clearsealer (not varnish) annually will keep it in good condition to help the timber last 15+ years.

DELIVERY INFO

Currently approx 1 week delivery time. For pallet delivery details please see our Delivery Information page.

Delivery is made on a wooden pallet via Pallet Transport lorry. You can select above if you would like the stores to arrive flat-packed in panels (a good idea when access may be an issue) or delivered partly assembled. Please consider how you will unpack assembled units from the pallet and put them in place (the lorry driver will not unpack the pallet for you).

Partly assembled means we build the double section to place it on the pallet, with the 3rd unit assembled and packed on top. When it arrives and is unpacked, you would only need to attach the 3rd store to the double, add the roofs and make any adjustments to the door levels - best done once in situ so that the bolt meets the bolt capture. Note: the stores should be completely level, on timber or concrete plinth, to ensure bolts meet captures.

If Flat-packed then it arrives as several complete panels with full instructions and all screws needed for self-assembly - only a cordless screwdriver required (watch our video above). 

DLS Banner
FB Banner

Reviews for: Triple Wheelie Bin Stores

This product hasn't been reviewed yet.

Write Your Own Review
You're reviewing:Triple Wheelie Bin Stores
Your Rating