Spare Parts for VSB & VSD Door Openers

Spare or Replacement Cord for VSB, VSD and Chickenguard Automatic Chicken House Door Opener Units. Price of cord includes postage.

Approx. 2 metres of very strong cord, with a 40 lb breaking strain, for Door Opener units. Colour may vary.

Use to replace broken cord or if needing to lengthen the existing cord.

For Information on how to restring your cord View Our Guide on Restringing a VSB Chicken Door Opener

Related products:

1. External Light Sensor Cable for VSB & VSD Units (Ref: VSBAS)

2. Replacement battery holder for VSB Units (Ref: VSB-BH)

3. Small Pulley for VSB & VSD Pop-hole Door Openers (Ref: VSBPUL)

People who bought this item also bought:

1. Replacement battery holder for VSB Units (Ref: VSB-BH)

2. FSF Blue Plastic Scraper Tool (Ref: 661820)

3. Barrier V1 Disinfectant, 1 litre concentrate (Ref: 8493)

Replacement battery holder for VSB automatic door opener units.

Takes four AA sized batteries and can be easily installed into the VSB automatic door opener casing and connects using two leads.

On the circuit board - the Black/Blue lead fits on to Pin 1A and the Red lead on to Pin 2A.

Related products:

1. Pack of 4 AA Energizer MAX PLUS Batteries (Ref: ENERG-BATT)

2. External Light Sensor Cable for VSB & VSD Units (Ref: VSBAS)

3. Small Pulley for VSB & VSD Pop-hole Door Openers (Ref: VSBPUL)

People who bought this item also bought:

1. Smallholder Poultry Growers Pellets (20kg) (Ref: PGP20)

External Light Sensor Cable for old VSB, and new VSD Chicken House Door Opener Units.

If you want to convert a VSD (or the old VSB) Door Opener to for internal use then this is the cable you need, or, if you just need to replace an existing cable.

The cable is exactly 1m in length and houses a photo cell in one end, also included is a black cap for covering the photo cell on the circuit board inside the unit. You simply attach the cable to two of the pins inside the VSB/VSD box and cover the internal light sensor on the circuit board. Then, fix the external light sensor (bulb) on the outside of your house and it will then close the door at dusk.

Light Sensors carry a one year warranty.

(FSF note: for purchases of sensor cable made after 2nd June 2017 the new cable will have a blue stripe around the end senosr. In this case the wires need to be connected thus: white wire to Pin 6 and brown wire to Pin 5)

Related products:

1. VSB Automatic Pop-hole Door Opener - external (Ref: VSBb)

2. Replacement battery holder for VSB Units (Ref: VSB-BH)

3. Large Pulley for VSB & VSD Pop-hole Door Openers (Ref: VSBHS2)

People who bought this item also bought:

1. VSD Auto Pop-hole Door Opener (Ref: AXT-VSDb)

2. Replacement battery holder for VSB Units (Ref: VSB-BH)

3. Digital Battery Timer for VSB & VSD Door Openers (Ref: BTVSB-D)

An External Manual Control Cable for VSD Units, 1m long, with a red sensor end. NOT suitable for VSB units.

The manual control cable is specifically for the VSD Door Opener Units (and VSE) to be able to remotely override the opening and closing of these Automatic Pop-Hole Dooor Openers.

This cable is connected to the internal circuit board of the VSD unit on to pins 8 (white cable) at the bottom and pin 7 (brown cable) above.

Use this cable in the case of an internally mounted VSD unit, where access to the unit may be restricted, to allow you to use the red magnet - that would normally be held up to the VSD to override - to be placed up to the sensor and close or open the door.

People who bought this item also bought:

1. Pair of Replacement Red Magnets for VSD doors (Ref: AXT-MAGNET-PR)

2. External Status Indicator Cable for VSD units (Green) (Ref: AXT-VSD-STATUS-LED)

Status Indicator Cable with Green LED for use with VSD units (with green band on sensor). This cable replicates the status flashes normally seen on the VSD unit but if your VSD is mounted inside the Coop it won't be visible. NOT suitable for VSB units.

Add this to your door opener set up so you can see the status of the VSD unit externally or from a distance. Green flash indicates door closed and all is ok; one Red flash indicates door blockage; 2 Red flashes shows batteries need replacing and 3 Red flashes shows a problem with the cord or an overload.

Attach the cables to Pins 9 and 10 inside the VSD unit (white cable to Pin 10 and brown cable to Pin 9). Place the LED through a 9mm hole to the outside of the coop so that it is easily visible. The Cable is 1m long.

People who bought this item also bought:

1. Pair of Replacement Red Magnets for VSD doors (Ref: AXT-MAGNET-PR)

2. External Manual Control Cable for VSD Units (Red) (Ref: VSD-1M-SA)

Pack of 4 AA Energizer MAX PLUS Batteries for VSB & VSD Auto Chicken Houses Door Openers and ChickenGuard Door Openers.

MAX PLUS Batteries from Energizer are 4% recycled batteries and last up to 12 years in storage.

We recommend only Energizer brand batteries are used for the ChickenGuard Auto Door Openers (they are best with this unit).

Related products:

1. Chicken Guard Automatic Door Opener - Standard AS (Ref: CGUARD-AS)

2. Chicken Guard Automatic Door Opener - Premium ASTi (Ref: CGUARD)

3. VSB Automatic Pop-hole Door Opener - external (Ref: VSBb)

4. VSB Automatic Pop-hole Door Opener - internal (Ref: VSBbi)

People who bought this item also bought:

1. External Light Sensor Cable for VSB & VSD Units (Ref: VSBAS)

2. Lightweight Pop-hole Door for Auto Door Openers (Ref: VSBDOOR)

3. Diagnosis & Repair Service for VSB (Ref: VSB-REP)

Pair of Red Magnets for VSD Door Opener Units on a metal strip for safety.

PRICE INCLUDES POSTAGE.

VSD Units come with one red magnet included. this pair is for replacement and comes with a metal strip and two screws to screw onto the henhouse and give them a home so they don't get lost.

People who bought this item also bought:

1. External Status Indicator Cable for VSD units (Green) (Ref: AXT-VSD-STATUS-LED)

2. External Manual Control Cable for VSD Units (Red) (Ref: VSD-1M-SA)