Runs for the Maggie's Six Hen Houses

A small 6ft long wired Run to fit the Maggie's Six Hen House. Run size: approx. 6ft x 3ft

There is an access door near the henhouse so you can close the pop-hole, and a second door at the end of the run allows access to place feeder and drinker.

(Shown here is 4ft 6in run with a sheltered end, or see image for 9ft run below). This is just the run not the house as well.

Please Note: Wherever possible we now use galvanised weldmesh with a green plastic coating on all runs to further enhance longevity. All images will show standard galvanised weldmesh.

A small 6ft long run to fit our Maggie's Six Henhouse (4ft 6in shown here). Simple to screw together and will provide security for your hens when needed. The run just sits against the front of the house and can be moved independently or taken away when not needed.

Run length is 6ft and it is 3ft wide, and the shelter cladding is 18 in wide. Built with a pressure treated 38 x 38 mm timber frame covered in strong one inch by half inch weldmesh.

A large door/pop-hole at the end gives access for feed and to let the hens out, and there is a door near the henhouse to aloow access for closing the pop-hole itself. This run would suit a few (e.g. 4) hens as a permanent run or, for larger hens, would keep them secure when necessary on a temporary basis.

If ordered at the same time as the house it will arrive with the house at no extra delivery charge, otherwise, if ordered on its own it would be delivered via courier, flatpacked with assembly instructions. (Please note: this is just the run not the house as well).

Please Note: Wherever possible we now use galvanised weldmesh with a green plastic coating on all runs to further enhance longevity. All images will show standard galvanised weldmesh.

9ft long wired run option to add to our Maggie's Six Henhouse, modelled here by Daisy and Dotty whilst Merlin - our Dane - wonders how he is going get in to play with them !

Built with pressure treated 38 x 38 mm timber frame covered in strong one inch by half inch weldmesh with plywood braces for rigidity.

The run arrives in flatpacked panels for you to simply screw together. (Please note: this is just the run not the house as well).

Please Note: Wherever possible we now use galvanised weldmesh with a green plastic coating on all runs to further enhance longevity. All images will show standard galvanised weldmesh.

A 9ft long run to add to our Maggie's Six Hen House (shown here with the house). Simple to screw together and will provide security for your hens when needed. The run just sits against the front of the house and can be moved independently or taken away when not needed.

Total Run length is 9ft and it is 3ft wide, and the shelter cladding is 18 in wide. Built with pressure treated 38 x 38 mm timber frame covered in strong one inch by half inch weldmesh, with plywood braces for rigidity.

A large door/pop-hole at the end of the run gives access for a feeder and to let the hens out. This run would suit up to six medium hens as a permanent run or would just keep them secure when necessary.

Please Note: Wherever possible we now use galvanised weldmesh with a green plastic coating on all runs to further enhance longevity. All images will show standard galvanised weldmesh.

(Please note: this is just the run not the house as well).