6ft & 9ft Runs for Hobby Hen House

A 6ft long run option to fit the Hobby 6 Henhouse. The run will arrive flat-packed with instructions for screwing together.

Wired in one inch by half inch weldmesh, it has an access door at the Henhouse end and a door at the other end for when you wish to let the hens out.

Currently one week order time. This run is delivered flatpacked, via courier. Exact delivery date will be detailed in separate confirmation email.

A 9 ft long enclosed run to fit on to the front of our Hobby Henhouse or Hobby Duck House. Click on image to enlarge.

Wired in strong weldmesh on to pressure treated timber framing and with a door at the end so that you can let the hens out without having to move the run. It has a door next to the house for access to the pop-hole of the house.

The run is made in panels for you to screw together, full instructions included. Price shown here is for the run only not the house as well.

Currently one week order time. This run is delivered flatpacked via courier. Exact delivery date will be detailed in separate confirmation email.

Click on image to enlarge.

A simple solution to prevent Foxes and Badgers digging under your Poultry Run.

The No Dig Skirt is 10 inch wide strips of 2" x 2" strong weldmesh ready to lay on the ground under the edges of your run and they are held in place with galvanised pegs (supplied with the skirt).

This small no-dig skirt would suit a run with a total footprint length of up to 20ft e.g. our Cottage Henhouse (approx. 4'x 4') or the 6ft and 9ft Runs for the Hobby Henhouse. Select this skirt also for the Haven Henhouse with 6ft run. If your run is non-Flyte so Fancy then just tell us the length by width and we will make the skirt accordingly.

There are the occasions when you may be away for the weekend, or on holiday and friends are in charge. This is an inexpensive way to give you the reassurance that the hens will be safe. The fox will instinctively want to dig right next to the base of the run and will not normally attempt to dig from several inches away.

Simply place the 10 inch wide strips of weldmesh on the ground around the outside of your run and peg in place. The mesh should be positioned so that the edge of the mesh is held under the base of the run (see photo) and then pegged down to hold in place (metal pegs included).

No-Dig Skirts are also available for larger runs up to 9' x 15' and for over 9' x 15' - again though if they are not Flyte so Fancy made, then just tell us the size you require.

Image shows the Cottage Henhouse with a No-Dig Skirt in place.